The type 5573
is designed as a fully automatic pressurising
dehydrator unit. Routine maintenance is minimised
by the use of an automatically regenerated molecular
sieve. Scheduled maintenance intervals are only
required after 5000 hours of compressor run time,
with a typical duty cycle of 5% - 10% this unit
is capable of running for prolonged periods without
intervention. The standard unit is fitted with
an air receiver tank in series with the dry air
output, the pressure in this tank is sensed by
the control electronics, closed loop control of
the compressor ensures that this pressure is maintained
at a preset level. This design feature ensures
that the dry air output pressure remains stable
over a range of load conditions, it also serves
to minimise the compressor duty cycle.
COMPRESSOR
Oil-less Air Compressor
POWER SUPPLY
220/240 Volts 50Hz
DRY AIR OUTPUT
13 Ltrs per min free air delivery
800 Ltrs per hour free air delivery
OUTPUT PRESSURE
0-15psi adjustable through distribution
panel
(available from Cable Pressure Systems)
DEWPOINT
Better than -40 Degrees Celsius
in ambient conditions
of +30 Degrees Celsius and 75% RH
WET DRY BYPASS
Fail safe solenoid valve at
dry air inlet to air receiver
controlled by Humidity Detector
ALARMS
High Humidity
Low Receiver Pressure
The customer can request additional alarms.
NOISE LEVEL
Better than 60 dBA @ a distance
of 1 meter.
HUMIDITY CONTROL
Digital Electronic Surveillance
AIR DRIER
Twin bed fully automatic heatless
reactivation.
Desiccant - molecular sieve.
RECEIVER
15 litre Air Receiver manufactured
to BS EN 286
DIMENSIONS
Height: 800mm, Depth: 325mm,
Width: 430
PAINT FINISH
Standard finish: grey BS381C
TINT 626
Other colours available
